PRODUCT CATALOG

Structural Heart | Structural Heart Occluders | Accessories (Structural Heart Occluders)

AMPLATZER™ Sizing Balloon II

Product Highlights

  • Triple lumen balloon catheter designed to measure cardiovascular structures
  • Compliant balloon material supports low pressure inflation and allows precise measurement of a variety of defect shapes when using stop-flow technique
  • Three radiopaque marker bands strategically placed to assist with alignment of imaging and support proper sizing calibration radiographically and echocardiographically
  • Soft distal tip and flexible shaft offer smooth access for atraumatic balloon positioning
  • Ultra think membrane requires no dilatation of the entry site; balloon can be introduced over the guidewire
AMPLATZER<sup>™</sup> Sizing Balloon II


Ordering Information

Contents: 1 sizing balloon

Reorder Number Maximum Defect Size Maximum Inflation Volume Balloon Length Shaft Size (F) Usable Length (cm) Guidewire
9-SB-018 20 mm 12 cc 3.5 cm 6 F 70 cm 0.035 inch
9-SB-024 27 mm 25 cc 4.5 cm 7 F 70 cm 0.035 inch
9-SB-034 40 mm 90 cc 5.5 cm 8 F 70 cm 0.035 inch

Rx Only

Prior to using these devices, please review the Instructions for Use for a complete listing of indications, contraindications, warnings, precautions, potential adverse events and directions for use.

Unless otherwise noted, ™ indicates that the name is a trademark of, or licensed to, St. Jude Medical or one of its subsidiaries. ST. JUDE MEDICAL and the nine-squares symbol are trademarks and service marks of St. Jude Medical, Inc. and its related companies.

©2018 St. Jude Medical, Inc. All rights reserved.

100033292 – May 2012

Customer Support: 855-478-5833

Last Updated: April 19, 2013