PRODUCT CATALOG

Vascular | Intravascular Diagnostics and Imaging | Cables

BARD™ Stamp Amplifier Connection Cables

Product Highlights

  • Connection cables for RadiAnalyzer™ and RadiAnalyzer™ Xpress systems, Wi-Box™ unit and PressureWire™ Receiver


Ordering Information

Two monitor cables and one adapter cable are required for each installation of RadiAnalyzer Xpress/Wi-Box.

For RadiAnalyzer use monitor cables for RadiAnalyzer Xpress plus an additional adapter cable (12748).

Reorder Number Cable Compatibility Type
C12661 RadiAnalyzer™ Xpress, Wi-Box, RadiAnalyzer™ Adapter Cable*
C12961 RadiAnalyzer™ Xpress, Wi-Box, RadiAnalyzer™, PressureWire™ Receiver Monitor Cable*
C12748 RadiAnalyzer Monitor Cable*

*Part number may vary in your region. The part number may or may not include a “C”. Please check with your St. Jude Medical representative for correct part number.

Rx Only

 

Brief Summary: Please review the Instructions for Use prior to using these devices for a complete listing of indications, contraindications, warnings, precautions, potential adverse events and directions for use.

 

BARD is a trademark of C.R. Bard, Inc. RadiAnalyzer system, PressureWire receiver and Wi-Box unit are designed, developed and manufactured by St. Jude Medical Systems AB.

Unless otherwise noted, ™ indicates that the name is a trademark of, or licensed to, St. Jude Medical or one of its subsidiaries. ST. JUDE MEDICAL and the nine-squares symbol are trademarks and service marks of St. Jude Medical, Inc. and its related companies.

©2018 St. Jude Medical, Inc. All rights reserved.

SJM-VAS-0814-0004

Customer Support: 855-478-5833

Last Updated: February 24, 2016