Vascular | Intravascular Diagnostics and Imaging | Cables

Witt Biomedical™ Series IV, Philips™ Connection Cables

Product Highlights

  • Connection cables for RadiAnalyzer™ and RadiAnalyzer™ Xpress systems, Wi-Box™ unit and PressureWire™ Receiver

Ordering Information

Two monitor cables and one adapter cable are required for each installation of RadiAnalyzer Xpress /Wi-Box.

For RadiAnalyzer use monitor cables for RadiAnalyzer Xpress plus an additional adapter cable (12748).

Reorder Number Cable Compatibility Type
C12648 RadiAnalyzer™ Xpress, Wi-Box™, RadiAnalyzer™ Adapter Cable*
C12948 RadiAnalyzer™ Xpress, Wi-Box™, RadiAnalyzer™, PressureWire™ Receiver Monitor Cable*
C12748 RadiAnalyzer Monitor Cable*

*Part number may vary in your region. The part number may or may not include a “C”. Please check with your St. Jude Medical representative for correct part number.

Rx Only


Brief Summary: Please review the Instructions for Use prior to using these devices for a complete listing of indications, contraindications, warnings, precautions, potential adverse events and directions for use.


Witt Biomedical and Philips are trademarks of Koninkliljke Philips Electronics N.V. RadiAnalyzer system, PressureWire receiver and Wi-Box unit are designed, developed and manufactured by St. Jude Medical Systems AB.

Unless otherwise noted, ™ indicates that the name is a trademark of, or licensed to, St. Jude Medical or one of its subsidiaries. ST. JUDE MEDICAL and the nine-squares symbol are trademarks and service marks of St. Jude Medical, Inc. and its related companies.

©2018 St. Jude Medical, Inc. All rights reserved.


Customer Support: 855-478-5833

Last Updated: February 24, 2016